F1 Manager 23 All Circuits Generic Setups Guide: Better Driver Confidence for EVERY Track - F1Setups (2024)

Jump To Setup

F1 Manager 23 Generic Setups… that’s why you’re here right? The thrill of racing in Formula 1 doesn’t just reside in high-speed chases and razor-edge overtakes—it also lies in the strategic decisions made off the track. As an F1 manager in F1 Manager 23, one of your most critical tasks is to understand each circuit’s unique characteristics and adapt your car setup accordingly. In this guide, we’ll provide a look at how to optimize your car setups for every track, boosting driver confidence and delivering top-notch performances. These setups will give you a headstart at most circuits. You may not get 100% driver confidence (check out our full guide for that) but you can run a successful race (we have a guide for that too) with these.

F1 Manager 23 Generic Setups

TrackFront AngleRear AngleAnti-RollTyre CamberToe-Out
Bahrain4116:04-3.40°0.50°
Jeddah7.5119:01-3.45°0.05°
Australia8137:03-3.10°0.55°
Imola6.512.54:06-3.50°0.05°
Miami8.513.53:07-3.25°0.15°
Spain8.5147:03-3.30°0.80°
Monaco10168:02-3.35°0.85°
Azerbaijan2.510.53:07-2.80°0.70°
Canada4.5122:08-3.05°0.65°
Silverstone611.59:01-3.20°0.35°
Austria5.513.52:08-2.95°0.45°
TrackFront AngleRear AngleAnti-RollTyre CamberToe-Out
France611.54:06-3.25°0.35°
Hungary10152:08-2.95°0.45°
Belgium39.54:06-3.35°0.65°
Netherlands9.513.56:04-3.20°0.75°
Monza192:08-3.00°0.85°
Singapore7.515.58:02-2.75°0.90°
Japan7135:05-3.45°0.00°
Texas (USA)8.5132:08-3.40°0.40°
Mexico6.5132:08-3.50°0.50°
Brazil7132:08-3.30°0.40°
Abu Dhabi512.54:06-3.20°0.70°
TrackFront AngleRear AngleAnti-RollTyre CamberToe-Out
Bahrain4116:04-3.40°0.50°
Jeddah7.5119:01-3.45°0.05°
Australia8137:03-3.10°0.55°
Imola6.512.54:06-3.50°0.05°
Miami8.513.53:07-3.25°0.15°
Spain8.5147:03-3.30°0.80°
Monaco10168:02-3.35°0.85°
Azerbaijan2.510.53:07-2.80°0.70°
Canada4.5122:08-3.05°0.65°
Silverstone611.59:01-3.20°0.35°
Austria5.513.52:08-2.95°0.45°
TrackFront AngleRear AngleAnti-RollTyre CamberToe-Out
France611.54:06-3.25°0.35°
Hungary10152:08-2.95°0.45°
Belgium39.54:06-3.35°0.65°
Netherlands9.513.56:04-3.20°0.75°
Monza192:08-3.00°0.85°
Singapore7.515.58:02-2.75°0.90°
Japan7135:05-3.45°0.00°
Texas (USA)8.5132:08-3.40°0.40°
Mexico6.5132:08-3.50°0.50°
Brazil7132:08-3.30°0.40°
Abu Dhabi512.54:06-3.20°0.70°

Conclusion:

Managing a race in Fl Manager 23 is a multifaceted challenge that requires understanding various game mechanics and strategies. From fuel and tyre management to ERS deployment and pit stop strategies, the game offers a detailed and immersive experience. Here’s a summary of key insights and strategies:

  1. Understand and Manage ERS: Learn how to balance the different ERS modes, including Deploy, Neutral, Top-up, and Harvest. Each mode has its own uses and can impact your race pace differently.

  2. Monitor Your Tyre Wear: Actively manage your tyre wear and find the ideal time to pit, considering factors like safety cars and changing weather conditions.

  3. Use Pit Strategies: Utilize your pit window effectively and use undercutting and overcutting to gain advantages over rivals. Respond dynamically to safety cars and race situations.

  4. Pause and Think: If you feel overwhelmed or unsure about your next move, don’t hesitate to pause the game and consider your options. A calculated decision can make a significant difference.

  5. Practice with Race Replays: Use the new race replay feature to practice individual race events and test different strategies. This hands-on experience can be invaluable.

  6. Utilize Available Resources: Consult strategy guides and tutorials to deepen your understanding of the game’s mechanics and strategies. Continuous learning and adaptation can lead to consistent success.

Remember, Fl Manager 23 offers a complex but rewarding racing management experience. With practice, attention to detail, and a willingness to experiment, you can refine your strategies and enjoy the thrill of managing a successful racing team.

Jump To Guide

Our F1 Manager 23 Setup is here! This years game is a good step forward from last years game, and there are some new details to learn. We are going to run through a quick intro into how to create the perfect car setup.

Remember, the game’s dynamics might evolve, so stay engaged, and be ready to adapt as you strive to ascend the leaderboards in F1 Manager 23. Keep an eye on this space, as we’ll be regularly updating with insights, strategies, and the latest tweaks to keep you at the pinnacle of performance. Happy racing!

F1 Manager 23 All Circuits Generic Setups Guide: Better Driver Confidence for EVERY Track - F1Setups (2)

Table of Contents (Jump to section)

Are car setups in F1 23?

Yes! Car setups are definitely part of F1 Manager 23, and are crucial to maximize your drivers’ speed and performance throughout the race and qualifying sessions.

In the dynamic and strategic world of F1 Manager 23, the art of car setup transcends mere adjustments and fine-tuning; it becomes a pivotal component in extracting the maximum potential from your drivers. Unlike F1 23, where setups focus primarily on speed and handling, F1 Manager 23 requires a unique approach that harmonizes the drivers’ preferences with the mechanical aspects of the car. This synergy leads to quicker and more consistent performance during both race and qualifying sessions.

This guide is designed to lead you through the crucial steps of understanding and optimizing car setups in F1 Manager 23. From practice sessions to achieving 100% setup satisfaction, we will cover every essential aspect.

F1 Manager 23 All Circuits Generic Setups Guide: Better Driver Confidence for EVERY Track - F1Setups (3)

Understanding Car Setups in F1 Manager 23

1. Importance of Car Setups:

Understanding the intricacies of car setup is pivotal in F1 Manager 23. Mastering this aspect translates into significant advantages on the track:

      • Quicker Driving: Through precise adjustments, car setup bolsters various performance facets, including acceleration, top speed, and cornering capability. The right balance unleashes your car’s potential, providing an edge over opponents.
      • Consistent Performance: A setup tailored to your drivers’ preferences and the track’s characteristics leads to smoother driving and a reduction in wear and tear. Consistency is key to success, and a well-configured car maintains peak performance throughout the race.
      • Driver Satisfaction: The synergy between the driver and the car is essential. A perfect balance in the setup can achieve 100% driver satisfaction, a vital element in maximizing their confidence and overall output.

2. Practice Sessions:

The practice sessions in F1 Manager 23 are not merely preliminary laps. They serve a strategic purpose:

      • Testing Ground: Practice sessions are the laboratory of the race weekend. It’s an opportunity to tinker, experiment with different setups, and gauge their real-world impact. Each adjustment reveals its influence on the car’s handling and performance, allowing for informed decisions.
      • Feedback Loop: Collaboration with your drivers is key. Engaging in a constant dialogue and interpreting their feedback empowers you to align the car’s setup with their individual driving styles. This symbiosis translates into a more harmonized and effective configuration.

In summary, the subtleties of car setup and effective utilization of practice sessions can elevate your performance in F1 Manager 23. These dimensions, though complex, offer a rich tactical depth. They invite a thoughtful approach where understanding, adaptation, and precision can yield rewards. Follow this guide as a roadmap to success, and the podium might just become a familiar destination.

F1 Manager 23 All Circuits Generic Setups Guide: Better Driver Confidence for EVERY Track - F1Setups (4)

Steps to Achieve 100% Setup Satisfaction

1. Analyze Driver Preferences:

      • Evaluate each driver’s specific needs regarding aerodynamics, suspension, transmission, and more.
      • Adjust individual settings to match these preferences without sacrificing the overall balance of the car.

2. Utilize Practice Sessions:

      • Employ real-time feedback from practice runs to refine the setup.
      • Experiment with different configurations to find the optimal balance.

3. Monitor and Adjust During Race Weekends:

      • Continually observe your drivers’ performance and their feedback during race weekends.
      • Make necessary adjustments to ensure consistent performance and maximize satisfaction.

4. Repeat and Refine:

      • Recognize that each track and condition may require unique adjustments.
      • Continually iterate and refine your approach to maintain peak performance throughout the season.

How Car Setups Work in F1 Manager 23

In F1 Manager 23, car setups continue to be an integral part of the game, mirroring the mechanics introduced in the previous year’s installment. These adjustments are more than just tinkering with the car’s hardware; they’re about creating a harmony between the car’s performance characteristics and the driver’s confidence on the track.

In F1 Manager 23, the intricacy of car setups is manifested in five specific areas. Here’s a closer look at each:

1. Front Wing Angle:

      • Adjustment Range: The front wing’s angle can be fine-tuned to influence downforce.
      • Impact: Affects the car’s grip on the track, particularly in corners. A steeper angle increases downforce, providing more grip but possibly reducing top speed. Changing this setting impacts the Oversteer, Braking Stability, Cornering, Traction, and Straights satisfaction level.
      • Driver Confidence: Properly aligning the front wing angle with a driver’s style can enhance their confidence, allowing for more aggressive driving.

2. Rear Wing Angle:

      • Adjustment Range: Like the front wing, the rear wing’s angle can be adjusted.
      • Impact: Influences Oversteer, Braking Stability, Cornering, Traction, and Straights satisfaction level.
      • A higher angle adds downforce but may sacrifice speed on straights.
      • Driver Confidence: Tailoring the rear wing to a driver’s liking can improve their feel and control of the car, leading to more consistent lap times.

3. Anti-Roll Distribution:

      • Adjustment Range: Balancing the stiffness between the front and rear anti-roll bars.
      • Impact: Helps control body roll in corners. Changes here affect how the car feels during fast direction changes. Adjusting this setting changes theOversteer, Braking Stability, Cornering, and Traction satisfaction level.
      • Driver Confidence: Finding the right balance can make the car more responsive and predictable for the driver, building confidence.

4. Tyre Camber:

      • Adjustment Range: The angle of the tires relative to the road can be altered.
      • Impact: Affects Oversteer, Braking Stability, Cornering, and Traction satisfaction level. More negative camber may provide better cornering but increase wear.
      • Driver Confidence: A setup that suits the driver can lead to better control and less tire-related anxiety during a race.

5. Toe-Out:

      • Adjustment Range: The tires’ angle relative to the car’s centerline can be tweaked.
      • Impact: Influences stability and Cornering only. Toe-out can make the car more responsive but potentially less stable at high speed.
      • Driver Confidence: Adjusting to a driver’s preference can improve their handling of the car, translating to quicker reactions and more aggressive
F1 Manager 23 All Circuits Generic Setups Guide: Better Driver Confidence for EVERY Track - F1Setups (5)

What is Driver Setup Satisfaction in F1 Manager 23?

Driver setup satisfaction is a crucial concept in F1 Manager 23, reflecting the harmony between the car’s setup and a driver’s preferences and comfort level. Unlike mere mechanical adjustments, this aspect captures the intricate relationship between machine and man, influencing how a driver performs on the track.

On the setup screen in F1 Manager 23, you’ll notice five additional blue bars located in the middle. These bars are a visual representation of your driver’s setup satisfaction. Here’s an exploration of what each bar signifies:

1. Oversteer:

      • Description: Oversteer satisfaction relates to how the car responds when turning sharply.
      • Impact: Tailoring the oversteer characteristics to a driver’s liking affects their ability to navigate tight corners and can lead to quicker lap times.
      • Management: Finding the right balance requires considering factors like front and rear wing angles and tire setup.

2. Braking Stability:

      • Description: This satisfaction bar measures how comfortable the driver is with the car’s stability during braking.
      • Impact: Proper braking stability helps in controlled deceleration and enhances the ability to enter corners at optimal speeds.
      • Management: Brake bias and pressure settings play a critical role here, allowing customization to each driver’s preference.

3. Cornering:

      • Description: Cornering satisfaction represents how well the car’s setup aligns with the driver’s expectations in navigating turns.
      • Impact: A high satisfaction level in cornering leads to more confident and efficient turns, contributing to overall race performance.
      • Management: Suspension setup and aerodynamic adjustments significantly influence cornering characteristics.

4. Traction:

      • Description: Traction satisfaction assesses how well the car’s power is transferred to the track, particularly when accelerating out of corners.
      • Impact: Improved traction allows for quicker acceleration and less risk of losing control, enabling more aggressive driving.
      • Management: Transmission and differential settings can be tuned to optimize traction to the driver’s liking.

5. Straights:

      • Description: Straights satisfaction measures how comfortable and confident the driver feels when driving on straight sections of the track.
      • Impact: A high satisfaction level here can lead to higher top speeds and more effective overtaking.
      • Management: Aerodynamic efficiency, particularly wing angles, plays a vital role in optimizing performance on straights.

Understanding Car Setup and Driver Satisfaction in F1 Manager 23

When working with car setups in F1 Manager 23, it’s vital to recognize that the car setup on the left panel is not specifically tied to the track. Unlike real-world racing strategies where you might adapt aerodynamics for high-speed tracks like Monza or Spa-Francorchamps, the game focuses more on alignment with the driver’s preferences.

How Car Setup Affects Driver Satisfaction:

1. Adjusting Car Setup:

      • Action: On the left panel, you have options to tweak various setup parameters like front wing angle, rear wing angle, etc.
      • Goal: Your aim is to align the white bars in the middle of the screen inside the blue bar range, representing driver satisfaction.
      • Non-dependency: The adjustments are not track-dependent but focused on maintaining the white bars within the blue range.

2. Monitoring White and Blue Bars:

      • White Bar Movement: While altering the car setup, the white bar on the right-hand side of the screen moves. Different setup changes influence various elements in the setup satisfaction screen.
      • Blue Bar Shrinking: During practice sessions, the blue bars will reduce in size as more runs are completed. This increases the challenge of keeping the white bars within the blue bars.

3. Driver Feedback and Percentages:

      • Feedback: Next to each area of car setup, drivers provide feedback that ranges from bad to good, great, and optimal.
      • Percentage Indicator: Below the feedback, a percentage reveals how close you are to achieving a perfect 100% car setup.
      • Continuous Feedback Loop: As drivers complete longer stints on the track, the comments and the blue bars’ size change, guiding you closer to the optimal setup.

Do you need Car Setups in F1 Manager 23?

In F1 Manager 23, car setups are not just a matter of adjusting your vehicle’s performance; they are integral to enhancing your driver’s preparation and confidence throughout the race weekend. Here’s how it works:

Driver Preparation:

  • What Is It? Driver preparation is a percentage-based indicator, ranging from 0 to 100%, that becomes apparent during practice sessions.
  • How to Increase It? You can boost driver preparation by enhancing your driver’s familiarity with the track (track acclimatisation), increasing understanding of car parts, and, most importantly, fine-tuning car setup satisfaction.

Driver Confidence:

  • Connection to Preparation: When you transition to qualifying and the actual race, the driver preparation converts into driver confidence.
  • Importance of Confidence: The level of confidence directly influences your driver’s performance. A more confident driver is more likely to succeed in both qualifying and the race.

Impact of Car Setup Satisfaction:

  • A Major Influence: Among the different factors that affect driver preparation, car setup satisfaction stands out as one of the most significant.
  • Getting Closer to 100%: By achieving optimal car setup satisfaction, you approach the pinnacle of driver preparation (100%) during practice sessions.
  • Improving Race Performance: This increased preparation subsequently boosts driver confidence, leading to better race performance.

Car setups in F1 Manager 23 are a pivotal element that extends beyond mere mechanical adjustments. It plays a crucial role in your overall strategy, influencing both the practice sessions and the main event. A well-tuned car setup not only improves your vehicle’s performance but also elevates your driver’s preparation and confidence. This synergy leads to a stronger qualifying performance and race results.

Hence, mastering the art of car setup is not just a technical endeavor but a strategic advantage. Understanding and perfecting this aspect of the game is essential for achieving success in F1 Manager 23. Don’t underestimate the power of car setup satisfaction; it might be the difference between standing on the podium and finishing outside the points. Focus on your drivers’ satisfaction, and they will reward you on the track!

F1 Manager 23 Car Setup Guide: How to achieve a Perfect Setup

First, let’s break down the importance of car setups in F1 Manager 23 and the specific approach to attain complete setup satisfaction:

      • Understanding the Importance: Car setups in F1 Manager 23 are crucial elements that directly impact performance. Achieving 100% setup satisfaction enhances the efficiency and competitiveness of the vehicle.

      • Starting with Practice Sessions: The journey to perfect satisfaction begins with the very first practice session. It is advised to actively engage in all three practice sessions to reach 100% setup satisfaction.

      • Avoiding Shortcuts: While it’s possible to simulate or skip these practice sessions, doing so might impede reaching complete satisfaction. Such shortcuts might bring some improvement, but the likelihood of getting close to 100% is low.

      • Emphasizing Hands-On Engagement: For maximum gains, participate actively in each practice session. This hands-on approach ensures that every aspect is fine-tuned and tailored to perfection.

In essence, F1 Manager 23 car setups are not just numerical values but an intricate process that requires attention, strategy, and deliberate actions. By fully engaging in the practice sessions and following these guidelines, you can guide your team to victory with the optimal car setup.

Step 1: How to begin

      • Beginning of Session: As you start the first practice session, you’ll notice the blue bars are quite wide.
      • Aligning White Bars: Your primary task for this initial run is straightforward. Simply ensure that the white bars align within the blue range, aiming for a rough placement in the middle.

This initial step forms the foundation of your setup process in F1 Manager 23. By placing the white bars within the blue range, you start the alignment that will be fine-tuned throughout the practice sessions. It’s a crucial beginning to creating a car setup that contributes to optimal driver satisfaction and race performance.

F1 Manager 23 All Circuits Generic Setups Guide: Better Driver Confidence for EVERY Track - F1Setups (6)

Step 2: Execute the First Practice Run

      • Adjust The Car Setup: Begin by making sure the white bars are in alignment with the blue range. Once properly aligned, you are ready to move on.
      • Tyre Selection: Navigate to the tyre compound window and opt for hard tyres. This is an essential decision for the first practice run.
      • Plan a 20-Lap Run: Set your run plan to approximately 20 laps. Aiming for at least 20 laps on your first run is key as the longer runs expedite track acclimatization.
      • Give Time for Setup Feedback: Providing ample time for the driver to furnish all 5 feedback points on the setup is crucial. If the feedback is incomplete, it can hamper the optimization process.
      • Monitor the Feedback Progress: Keep an eye on the comments icon on the practice goals screen. It will incrementally increase from 0/5, representing the feedback on the setup.
      • Look for the Blue Icon: When the feedback reaches 5/5, a blue icon will appear, signaling that all setup goals are met and 20 laps are completed.
      • Pit Stop: Once the setup goals are achieved, bring your driver back into the pits to make the necessary tweaks to your car setup.

This second step represents a more hands-on approach, actively monitoring and engaging with your driver’s performance and feedback.

F1 Manager 23 All Circuits Generic Setups Guide: Better Driver Confidence for EVERY Track - F1Setups (7)

Step 3: Make Some Changes

      • Back in the Pits: As your driver returns to the pits, tap the reconfigure button to access the car setup screen, observing the blue bars’ reduction in the setup satisfaction display.
      • Absorbing Feedback: Analyze the feedback on the car’s bias in different areas. Whether positive or negative, this feedback indicates the proximity of the white bar to the perfect setup, with optimal alignment being the ultimate goal.
      • Tweaking the Setup: If white bars slip outside the blue range, readjust so all five white bars reposition within the blue scope. If already in the blue range, make slight variations that differ from the previous setup, assisting us in discerning which way to go with future adjustments.
      • Markers’ Guidance: Notice two blue markers signifying the best setup to date, along with white markers above and below the bar. While their full relevance becomes apparent after the second practice run, essentially, blue markers represent the optimal setup thus far, and white markers reflect the previous configuration.

By carefully making these modifications, you’re working towards achieving 100% setup satisfaction. These minute adjustments are integral in optimizing the car’s performance and ensuring that it’s perfectly tailored to both the driver’s style and the specific demands of the track. In this step, mastery over the white and blue markers can give you an edge in narrowing down the most effective setup, laying the groundwork for the subsequent practice run.

F1 Manager 23 All Circuits Generic Setups Guide: Better Driver Confidence for EVERY Track - F1Setups (8)

Step 4: Launch the Second Practice Run

      • Tweak Car Setup: After making the necessary adjustments from the first run, you’re ready to proceed with the second practice run.
      • Select Tyres: Re-evaluate your hard tyres. If they’re in good condition, they can be reused. If not, choose a fresh set to ensure optimal performance.
      • Repeat the 20-Lap Run Plan: Like the first practice, establish a run plan for 20 laps. However, this time, the run may not need to last the full 20 laps.
      • Monitor the Setup Feedback: Watch closely for the driver’s setup feedback. Once all 5 comments are received and the icon turns blue, the driver has provided complete feedback.
      • Return to the Pits: As soon as the setup feedback is complete, call your driver back into the pits, even if 20 laps are not yet reached.

The fourth step emphasizes continued refinement and adaptation. While repeating some of the first practice’s elements, it’s vital to respond to the feedback and monitor the equipment’s condition. This step brings you closer to honing in on the perfect setup, balancing precision adjustments with real-time responsiveness to your driver’s feedback.

Step 5: Refine and Narrow Down the Setup

  • Evaluate the Second Run: After completing the second practice run, your drivers will return to the pits. Notice that the blue bars on the setup satisfaction screen have shrunk, and some white bars might have moved out of the blue range.
  • Analyze and Compare Markers: With two practice runs completed, it’s time to dive deeper into the car setup. Focus on the “previous” and “best” markers. The white markers show your most recent setup adjustment, while the blue ones indicate the most accurate setup so far.
  • Determine the Direction of Adjustment: Use the comparison between the best and previous markers to decide the next move. If the best marker is to the left of your previous guess, you’ll need to adjust the setup in that direction, discarding any possibility on the right side.
  • Make Targeted Adjustments: Based on this analysis, tweak the car setup accordingly. Move the white bar in the desired direction, closer to the optimal setup point.

Step 5 is about precise calibration, leveraging insights from previous runs and the real-time information provided during the current session. Utilizing the visual cues from the markers, you can now make more targeted adjustments to zero in on the perfect car setup, approaching it incrementally and analytically.

When dealing with car setup feedback, there are two distinct scenarios to consider:

  1. Fixing Bad Feedback: If feedback is poor and the white bar falls out of the blue range, a significant adjustment to the car setup might be required. In this situation, one can move the white bar quite assertively towards the opposite side of the blue bar, knowing that the previous setup attempt wasn’t near the optimal configuration. This drastic measure can help swiftly pinpoint the correct direction for the setup during the third practice run.

  2. Refining Great Feedback: Conversely, if the feedback is positive or excellent, it’s a sign that the perfect setup is within reach of the previous attempt. Therefore, there’s no need to substantially shift the white bar to find the optimal position. Good feedback signals that you’re near the target, while great feedback indicates you’re very close, necessitating only minor, nuanced adjustments.

F1 Manager 23 All Circuits Generic Setups Guide: Better Driver Confidence for EVERY Track - F1Setups (9)

Step 6: Third Practice Run and Final Adjustments

After reevaluating and adjusting the setup bars to your satisfaction, it’s time to send your drivers back onto the track for another 20-lap stint. During this phase, it is crucial to promptly call them in once you’ve received all 5/5 setup comments.

Prior to this run, make sure you’ve fine-tuned each aspect of the car setup, keeping in mind the feedback received earlier. For great feedback, only minor adjustments will be necessary, whereas negative feedback will require more drastic changes. In all cases, the goal remains the same: to ensure that the white bars are situated within the blue range. This final run is a culmination of the previous stages, where precise alignment with the feedback ensures a well-calibrated vehicle, primed to perform at its best.

With three practice runs completed, the window for optimal setup narrows, and the blue bars will be considerably smaller. You might have reached a generally favorable setup by now, but if not, there’s no need to worry.

Remember you have three practice sessions at your disposal, which means ample opportunity to meticulously refine your car setup. In some instances, exhausting all three sessions and several runs might be necessary to achieve the perfect configuration.

After your third practice run, the emphasis shifts to smaller, more refined tweaks. Keep an eye on the blue and white markers, which symbolize your best and previous setup attempts. These bars will guide you towards the optimal setup direction. For example, if your previous attempt was left of the best marker and only received good or negative feedback, you’ll know to shift the setup to the right of that marker.

Remembering feedback from previous runs is vital. If feedback deteriorates from great to good or bad, it signals that you’ve taken a wrong turn with the setup. You must then realign your configuration towards or even past the best marker.

As you get closer to perfection, focus on minor adjustments. When multiple aspects of your car setup satisfaction are in the optimal range, be delicate with your tweaks. Concentrate on areas that are not yet optimal, avoiding unnecessary changes to the already perfect zones.

Certain changes, like adjustments to your front wing, toe-out, and tire camber, should be considered first, as they affect the setup in smaller increments. On the contrary, it’s generally advisable to avoid altering the rear wing, which would result in more drastic changes.

The culmination of this step is a delicate dance of adjustments, fine-tuning each area of the car setup to ensure each bar is placed precisely where it needs to be. The process is iterative and requires attention to detail, but the result should be a car with the perfect setup.

F1 Manager 23 All Circuits Generic Setups Guide: Better Driver Confidence for EVERY Track - F1Setups (10)

How do adjustments affect car setup in F1 Manager 23?

As you dive deeper into refining your car’s configuration, the challenge lies in maintaining the optimal range across multiple areas, balancing the delicate interplay between components.

During this stage, the focus on achieving all white bars in the blue range becomes paramount. The complexity arises when adjustments to one area inadvertently affect others. You may find yourself in a situation where an optimal setting for braking stability is offset by changes to other parts of the setup. When this occurs, further fine-tuning is needed to regain the balance.

The process may appear daunting, but understanding how each tweak affects the overall setup can make the task more manageable. Below is an exhaustive breakdown of key adjustments:

      • Front Wing Angle: Influences Oversteer, Braking Stability, Cornering, Traction, Straights.
      • Rear Wing Angle: Affects Oversteer, Braking Stability, Cornering, Traction, Straights.
      • Anti-Roll Distribution: Modulates Oversteer, Braking Stability, Cornering, Traction.
      • Tyre Camber: Impacts Oversteer, Braking Stability, Cornering, Traction.
      • Toe-Out: Specifically Affects Braking Stability, Cornering.

A strategic approach to setup involves initiating with the front and rear wings, as these two aspects uniquely impact the straights part of the setup. By carefully adjusting both, you can attain the required straights satisfaction, subsequently moving on to other areas with the assurance that your straights configuration will remain constant.

It is noteworthy that the rear wing angle has a more pronounced effect on your setup, allowing for significant adjustments across various elements. Conversely, the toe-out, affecting only braking stability and cornering, is generally reserved for last, serving as a tool for precise refinements.

As F1 Manager 23 offers an intricate and dynamic setup environment, the insights provided here should serve as a foundational guide. By adhering to these principles and continually adapting to your unique driving style and race conditions, you’ll find yourself well-equipped to conquer the competitive landscape of F1 Manager 23.

Achieving Optimal Performance in F1 Manager 23: The Path to Perfection

Perfection in car setup is a dynamic challenge that requires continuous tweaking and attention to detail. The path to optimal configuration for both drivers across the three practice sessions in F1 Manager 23 can be intricate. Sometimes fortune smiles, and a near-perfect setup falls into place early. Other times, it demands rigorous effort, adjustment, and patience.

By adhering to the strategies outlined above and maintaining a keen eye on previous and best markers, you’ll methodically inch closer to the optimal car setup. The reward is a driver brimming with confidence, poised to conquer the race weekend with a finely-tuned machine.

Even if you manage to reach 100% car setup satisfaction before practice 3, it is still wise to continue the journey through the remaining practice sessions. The reason behind this is multifaceted:

  • Track Acclimatisation: More practice equates to better familiarity with the circuit, improving your driver’s adaptability and performance.
  • Car Parts Knowledge: Further practice enhances the understanding of individual components, contributing to a more precise and effective setup.
  • Driver’s Confidence: Increased track time reinforces your driver’s confidence, a crucial element for success in high-stakes racing scenarios.

The pursuit of perfection in F1 Manager 23 is a rewarding endeavor, but it is not without its challenges.

Watch on

F1 Manager 23 All Circuits Generic Setups Guide: Better Driver Confidence for EVERY Track - F1Setups (11)

F1 Manager 23 All Circuits Generic Setups Guide: Better Driver Confidence for EVERY Track - F1Setups (2024)

FAQs

What is driver setup confidence in F1 manager? ›

Driver Confidence

A driver with low confidence is at a higher risk of making a mistake on the track, so to get the best out of them, you need to make sure they start the race focused on the win. Drivers can suffer hits to their confidence during the race, too.

What is the best car setup for F1 23? ›

For Suspension, Front Camber -3.2, Rear Camber -1.70, Front Toe Out 0, and Rear Toe In 0.15 provide an excellent setup. The Suspension settings have six options; for Front Suspension, a maximum setting of 41 maintains the grip at the front of the car and works fine across a range of tracks in F1 23.

What are race targets in F1 manager? ›

When heading into a race weekend you'll also be asked to review your race targets, which outline your expectations for each of your cars and drivers. These will determine what your driver must do to receive a bonus and can also impact their overall mentality.

How do new drivers gain confidence? ›

How do I overcome my fear of driving?
  1. Familiarise yourself with your car before you start driving.
  2. Practice makes perfect.
  3. Drive with someone you trust.
  4. Take an advanced course or a few refresher lessons.
  5. Check your route before you begin.
  6. Focus on your own driving.
  7. Use P plates.
  8. Reduce your distractions.
Jan 3, 2024

How important is confidence in driving? ›

The reason why confidence is important is because it helps to avoid many problems that can occur in driving. It can help to eliminate some of the problems such as trying to follow too many people or even thinking that you're in trouble before you really are.

How to stop understeer in F1 23? ›

Understeer happens when you try turning into the corner, but the car does not respond; instead, it feels like it's caught in a magnetic field and is being pulled to the outside of the circuit. The trick here is to brake harder and to get off the brake before you turn into the corner.

What is brake bias in F1 23? ›

Brake bias is the relationship between the braking force of the front and rear brakes. If you are consistently locking front or rear wheels, you can adjust this setting to either end of the car to compensate for front or rear locking.

What is the best brake setting for F1 23? ›

The brake bias set to around 55% is optimal in F1 23. But depending on track, this can be anywhere between 53% and 58%. If you are using ABS assist, you can lower this still to close to 50%, although this isn't very realistic.

How to be good at F1 Manager 23? ›

F1 Manager 2023 tips for beginners
  1. Research and development. Make sure to use all of your allocated testing time by designing and researching new parts. ...
  2. Optional sponsor goals. ...
  3. Free Practice. ...
  4. Starts. ...
  5. Strategy. ...
  6. Fuel. ...
  7. Safety Cars and weather. ...
  8. Keep a cool head.
Jul 27, 2023

What does cooling do in F1 manager? ›

Engine Cooling affects only the degradation rate of the engine parts (Engine, ERS, Gearbox). It's not essential. Brake Cooling on the other hand is quite important. There are two separate facilities that give bonuses to it and for a good reason.

What is the red flag strategy in F1 manager? ›

How to use red flags to improve your race. Red flags are unique in that they let you change your tyres and race strategy while waiting in the pit lane. This ensures all drivers have the same advantage when the race restarts. This is the same in F1 24, with the race strategy screen being accessible during a red flag.

How to improve your car in F1 Manager 22? ›

I can tell you the best way to improve your car is by focusing only on chassis and suspension first tho. you design only the suspension and chassis but do not spend any CFD or wind tunnel hours.

Do you get to race in F1 manager? ›

Racing is the form of battle this game provides in the form of PVP where you will battle other F1 Manager players in a 'race' to see who scores the most points in one race. At this time “Duels” is the only option for the gameplay.

Do you drive the cars in F1 manager? ›

Still, you must be ready to respond to on-track changes like crashes, safety cars, and changing weather – making intelligent choices to unexpected events can get you a place on the podium. While you aren't directly behind the wheel of the car in F1® Manager 23, you can give instrumental instructions to your drivers.

What is confidence in F1 curve? ›

F1 Confidence: Shows the F1 score (harmonic mean of precision and recall) at different confidence thresholds. A higher peak suggests better model performance. Precision-Recall Curve: Illustrates the trade-off between precision and recall for different thresholds.

What are the most important parts in F1 manager 22? ›

  • Your most important and impactful parts to pure pace are, in order: Underfloor, Front Wing, Rear Wing.
  • Sidepods, Suspension, and Chassis are not vital to keep competitive, but should not be ignored as they control your cooling and give you options for strategy.
Jul 28, 2023

What is driver talent setup? ›

Driver Talent is a simple yet effective tool that lets you update and manage drivers on your computer. The program scans your entire computer to locate outdated, problematic, malfunctioning, and missing drivers, and fixes them with a single click.

How to win every race on F1 Manager 22? ›

If you want your driver to push their pace a lot through a race, you can look to over-fuel them. This will allow them to run on the push mode for longer. This can be useful if you want to finish the race strong by pushing late in the race. Or if your driver is running a very aggressive tyre strategy.

Top Articles
Latest Posts
Recommended Articles
Article information

Author: Velia Krajcik

Last Updated:

Views: 6253

Rating: 4.3 / 5 (74 voted)

Reviews: 81% of readers found this page helpful

Author information

Name: Velia Krajcik

Birthday: 1996-07-27

Address: 520 Balistreri Mount, South Armand, OR 60528

Phone: +466880739437

Job: Future Retail Associate

Hobby: Polo, Scouting, Worldbuilding, Cosplaying, Photography, Rowing, Nordic skating

Introduction: My name is Velia Krajcik, I am a handsome, clean, lucky, gleaming, magnificent, proud, glorious person who loves writing and wants to share my knowledge and understanding with you.